Ruler Foot Medium Shank (Metal) +Echo Ring Clip Set of 6 Sizes

Welcome visitor you canlogin orcreate an account.

Ruler Foot Medium Shank (Metal) +Echo Ring Clip Set of 6 Sizes

Product Code: RUFT-MS-NS+ERC-SET6

$45.00

Quantity

Description

Ruler foot : Low Shank (Universal-Short)

The ruler foot has a 1/2" outside diameter, ensuring an accurate 1/4" distance from the needle to the edge. Also included is a set of 6 Echo Ring Clips in sizes 3/8", 1/2", 5/8", 3/4", 7/8", and 1". These Echo Ring Clips are laser-cut from 5mm acrylic and laser-engraved on the back to reduce parallax errors.

Picture shown is with "red" marking line and inch.

However the product is engraved/etched by laser without colour. We recommend you to use water-based marking pen preferably in "red" or "pink" colour to colour the etched markings lines for better visibility.

Since the opening is cut slightly smaller than 1/2" to ensure the ring will not fall off, so if you find it difficult to push the ruler foot into the hole just use awl to open up a little bit wider as shown in the picture.

Use it on all ruler feet that has a 1/2" (12.7mm) outside diameter to do the echo size you need. The sizes denote the distance from the needle to the edge. Usually all ruler feet for both domestic sewing machines and all longarm or mid-arm quilting machines like Handi Quilter, Bernina, Innova, Nolting, Martelli, Juki, Janome, Q'nique, Babylock etc. etc. have 1/2" (12.7mm) outside diameter so just clip the echo ring onto the ruler foot.

When using the edge of the ruler foot, there is a 1/4” distance from the needle to the edge of the foot. The Echo Ring Clip provide a 3/8” interval, 1/2” interval, 5/8" inverval, 3/4” interval, 7/8" internval and a 1" interval.

These echo feet are very helpful when quilting piano keys on a border and when creating channel quilting. Easily echo different distances around a singel circle ruler template. Or create grids and cross-hatching with different widths.

Special design with two "U" shape recesses - one on the front for sit-down free motion quilting and the other one on the side for stand-up quilting on the frame for better visibility.

Medium shank fits Janome "high shank" machines MC5000, MC5700, MC6600, MC6700, MC7700, MC9000, MC10000, 10001, 11000, MC12000, MC14000 Horizon, MC15000 Horizon, MC8200QC, MC8900, MC8900QCPSE, MC9400QCP, MC9900 Memory Craft, S5 Skyline, Skyline S9 and Elna "high shank" machines 8006, 9006, CE20, 680 eXcellence, 730 eXcellence, 730PRO eXcellence, 760 eXcellence, 760PRO eXcellence, 780 eXcellence, 860 eXpressive, 900 eXpressive, 920 eXpressive etc. and Brother PC8500D, ULT2003D, VE2200, VM5100, VM6200D, VQ2, VQ2400, VQ3000 and Baby Lock BLAR, BLDY Destiny, BLDY2 Destiny II, BLJY Journey, BLTY Unity, ESG3 and Elna 720 eXcellence, 7300, 740 eXcellence, 8006, 9006, 9600, CE20, e9500

Note: When using 9mm machine, please set 3.5mm as centre of the needle.
Will also fit some low shank machines like Janome, Brother, Babylock etc. - please check with us if in doubt.